60 Inch Side Outlet Linear Shower Drain with Hair Trap by SereneDrains
60 Inch Side Outlet Linear Shower Drain with Hair Trap by SereneDrains
Net Size: 59.05" x 2 3/4" (1500 mm)
Overall Size: 60.63" x 4 3/8"
Intake Surface Area: 31.67 sq. in.
(Additional sizes available — see below)
The Offset Outlet Linear Drain is ideal for installations where a traditional center outlet isn’t practical. Use this drain in the following situations:
-
When a structural joist runs through the center of the shower floor, and cutting, notching, or drilling into it isn’t allowed due to building codes or structural concerns.
-
When the shower is built over 4 inches or more of concrete — such as in slab-on-grade construction, where the concrete slab is poured directly on the ground. In these cases, relocating plumbing is costly and labor-intensive.
-
When the existing vertical drain outlet is already positioned toward the side of the shower. Using a side outlet linear drain aligned with the current plumbing can save both time and money.
This side outlet configuration allows for flexible placement and is especially useful in remodels or concrete-based builds.
Note: Central vertical outlet linear drains are also available (consult a professional for guidance).
What's Included
- 100% Stainless Steel Channel Body & Grate
- Rubber Gasket
- Puller Key
- Waterproofing Membrane Sheet (included, though not required)
- Hair/Debris Strainer
- Installation Instructions
Design Options
Choose from 6 luxurious grate designs: Wind Design, Ocean Wave Design, Traditional Square Design, Broken Lane Design, Tile Insert Design, Linear Wedge Design
Ideal For
Wheelchair-accessible and barrier-free showers (walk-in designs)
Applications: Showers, baths, hotel rooms, gyms, spas, and more.
Construction Details
- Offset vertical outlet: 2.8" from end (center-to-outlet)
- Fits any standard 2" shower drain flange
- Fully welded and leak-tested stainless steel body
- Pre-sloped channel: 2 3/4" (70 mm) wide
- Compatible with tiles up to 10 mm thick (14 mm lip)
- Electro-polished finish
- Made from 16-gauge 304 stainless steel
- Sized to match 1/2", 1", 2", and 4" tiles — no cutting required
- Flow Rate:
• Entrance: 6.3 GPM (0.4 l/s)
• Wall-adjacent: 9.5 GPM (0.6 l/s) - Flange design supports all waterproofing methods: hot mop, liquid/painted membranes, sheet membranes, vinyl, etc.
- Durable, easy to maintain — no special cleaning required
Optional Accessories: ABS/PVC drain flanges and additional debris strainers available
Available Sizes
| Size | Net Dimensions (in / mm) | Overall Dimensions | Intake Area (sq. in) |
|---|---|---|---|
| 16 Inch | 15 3/4" x 2 3/4" (400 mm) | 17 1/4" x 4 3/8" | 12.38 |
| 24 Inch | 23 1/2" x 2 3/4" (600 mm) | 25.2" x 4 3/8" | 14.96 |
| 30 Inch | 30" x 2 3/4" (762 mm) | 31.57" x 4 3/8" | 17.62 |
| 36 Inch | 35 3/8" x 2 3/4" (900 mm) | 37.01" x 4 3/8" | 20.03 |
| 40 Inch | 39 3/8" x 2 3/4" (1000 mm) | 40.95" x 4 3/8" | 21.12 |
| 48 Inch | 47 1/4" x 2 3/4" (1200 mm) | 48.82" x 4 3/8" | 26.68 |
| 60 Inch | 59.05" x 2 3/4" (1500 mm) | 60.63" x 4 3/8" | 31.67 |
Contact us for contractor pricing and quantity discounts.